Sensor
-
Posted On MultiSensorESPHome MultiSensor – Firmware, final components choice, and wiring
End of the project, with all the details needed to do your own device Final electronic components used : Cable schematics : Minimal code (You…
-
Posted On MultiSensorESPHome Multisensor – Case design
To complete the project i had to design the case to include all components. For that i began using Fusion 360 for makers, but after…
-
Posted On MultiSensorESPHome MultiSensor – Move and presence detection
Using an LD2410C for presence and move detection. The sensor must be able to detect presence / distance and move for advanced automations. For this…
-
Posted On ProgrammingMQTT – Collect your own sensor data on Home Assistant
To collect your sensor data on home assistant you must have a MQTT broker on it. If it’s not the case, add MQTT integration and…
-
Posted On Programming
MQTT – Publish your own arduino / ESP sensor data
Today we will learn how to publish the data of our home made sensor to Home Assistant MQTT broker. To send data to a broker…
-
Posted On MultiSensorESPHome MultiSensor – Illuminance
Make your own Home Assistant ultimate MultiSensor. First we will study illuminance sensor using ESPHome.. For this project you will need : Wiring diagram :…
-
Posted On MultiSensorESPHome MultiSensor – The project
I am a regular user of Home Assistant, and i need more and more sensors for my automations. So i decided to make the ultimate…
Aurélien Bordinat
I am a french computer engineer, adept of DIY, home automation and new technologies. When i’m not busy trail running, i spend some time prototyping.
